Connecting your Mac to a wired Ethernet internet connection is easy. In this article, we are going to walk you through the steps.
Macbook Pro Ethernet Port
Suppose Ethernet port #2 were not in use on the Mac Pro in Figure #1. Further suppose an AirPort base station is connected to switch #2, but the Mac Pro is acting as both the master iTunes library. Use an Ethernet cable to connect your computer's Ethernet port to a modem or other network device. Restart the Mac, and everything now should be working fine. It can be challenging to deal with Mac Ethernet problems, but it is not impossible. The article can help you fix Mac Ethernet problems very well. But if the problem persists, it is advisable to follow the Apple forum or can take the help of a Mac Expert to resolve your issue.
Mac Pro Cosmetics
Step 1: Some older Macs come equipped with an Ethernet port, but most will require you to use either a Thunderbolt-to-Ethernet or USB-to-Ethernet adapter. Once you have connected your Ethernet cable to your laptop, plug the other end into your modem or router.
NOTE: macOS or OS X can be restrictive. Some users will find issues adding connections to their mac. In these cases, get in touch with your network adapter manufacturer for further support.
In most cases, you will connect to the internet automatically. If not, proceed as follows.
How to connect a MacBook Pro to a wired network. Your Ethernet 10/100/1000 port (which looks like a slightly oversized telephone jack) is located on one of the sides of your MacBook Pro, ready to accept a standard Ethernet Cat5/Cat5E/Cat6 cable with RJ-45 connectors. MacBook Pro USB Adapter, USB C Multiport Adapter Hub Mac Dongle for MacBook Pro/Air with 4K HDMI Port, Gigabit ethernet, 2 USB 3.0, TF/SD Card Reader, USB-C.
Step 2: Click the Apple menu and select System Preferences; then click Network.
Step 3: Select the Ethernet connection from the list on the left, keeping in mind that it may be named according to the adapter you are using.
Step 4: Click the Configure IPv4 pop-up menu and choose your ISP's recommended configuration method. You can read more about these configurations here.
Step 5: Under Advanced, click DNS. Then add a DNS server using the + button. Enter the IP address of your ISP's DNS server.
Ethernet Adapter For Mac Pro
Step 6: Click Apply to activate these settings.
